|
|
| SIAM
HARDWARE Industry Co., Ltd. |
|
|
|
| We
Manufacture :- |
- Investment
Casting ( Lost Wax Casting )
- Die
Casting
- Stamping
|
Siam Hardware Industry Co., Ltd. found in
1956, is the private company shared by 100%
Thai shared holders. From the beginning up
to now, it can manufacture effectively from
mold and die for metal to ready-made
products, stamping and pressing for steel,
stainless steel, brass and aluminum. Later
the company can expand to manufacture die
casting such as zinc alloy, aluminum alloy
and brass alloy and later investment casting
(lost wax casting) for alloy steel,
stainless steel etc. has been manufactured.
|
|
Beside these, our company gives service in
machining and finishing for the products
produced by the various ways such as lathing,
drilling, vibrating, electro plating, powder
coating, Heat Treatment (Hardening,
Tempering, Normalizing, Annealing) and
Solution Heat Treatment for stainless steel,
etc.
Capital
paid
: 240,000.00 US Dollars
Factory area
: 36,000. sq.m.
Production area : 26,000. sq.m. |
|
|
|
|
|
|
| Investment
Casting (Lost Wax Casting) |
|
|
|
|
Investment
casting in every metal-component industry
can offer advantage to the production
engineer, designer or buyer and where
requires complex shapes. The following
advantages of investment castings in the
widest choice of materials : - |
- Can
eliminate most rough machining
operations
- Give
greater freedom of design
- Produce
shapes impossible to machine
- Provide
lighter and cleaner components
- Relieve
production problems by replacing
assemblies with one piece
|
Investment
Casting (Lost Wax Casting)
1. Capacity 1,800 ton / year
2. Casting lightest weight of work piece 5
gram
3. Casting heaviest weight of work piece 10
kg.
4. Casting thinnest of work piece 0.50 mm.
5. Casting thickest of work piece 50 mm.
6. Casting width of work piece 250 mm.
6. Casting length of work piece 250 mm. |
|
|
| Investment
Casting Process ( Lost Wax
Casting ) |
| Die
Design |
 |
| Die
Manufacture |
|
| Wax
Injecting |
|
| Wax
Assembly |
|
| Dip
Coating |
|
| Stuccoing |
|
| Dewaxing |
|
| Sintering |
|
| Casting |
|
| Knock
Off |
|
| Cutting |
|
| Sand
Blasting |
|
| Tempering |
|
| Machining |
|
| Hardening |
|
| Finishing |
|
| Inspection |
|
| Packing |
|
| Delivery |
|
|
|
|
|
|
|
|
| Our
company uses progressive die production to
manufacture 250 pieces of stamping part in a
second for steel, stainless, aluminum, brass, etc. |
1.
Capacity 2,500 ton / year
2. Casting lightest weight of work piece 1 gram
3. Casting heaviest weight of work piece 5 kg.
4. Casting thinnest of work piece 0.10 mm.
5. Casting thickest of work piece 8 mm.
6. Casting width of work piece 305 mm.
7. Casting length of work piece 305 mm. |
|
|
|
|
| Die
casting products such as zinc alloy die cast,
aluminum alloy die cast and brass alloy die cast
are produced by our hot and cold chamber machine
ranging size 25 to 300 ton. |
1.
Capacity 700 ton / year
2. Casting lightest weight of work piece 10 gram
3. Casting heaviest weight of work piece 7 kg.
4. Casting thinnest of work piece 0.50 mm.
5. Casting thickest of work piece 50 mm.
6. Casting width of work piece 400 mm.
7. Casting length of work piece 400 mm. |
|
|
|
|
|
|
